DECISION PCCOM PCI DRIVER

The on board switch can be used to identify card number by the users if you do not set the switch, the PnP BIOS will assign card number automatically. This series enables you to utilize the built in plug and play functionality of Windows , combined with the power of PCI based serial communication. For optimum PnP functionality, please install one card at a time. In order to gain access to the expansion slots, follow the steps listed below: Under this configuration, the user setting baud rate is the same as RS baud rate. After the device driver is installed, It takes over communication between CPU and multi-serial cards such as four port card, eight port card,

Uploader: Kagataur
Date Added: 24 December 2014
File Size: 61.19 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 31795
Price: Free* [*Free Regsitration Required]

PCCOM – Solution Provider for RS// Serial Communication

During external loopback test, a loop back plug must be connected to each port being tested. In order to gain access to the expansion slots, follow the steps listed below: During the boot-up of Windows the hardware will be automatically detected by the WINDOWSjust ignore this dialog box by clicking cancel and during login, use the administrator user name for installation E.

Start your computer and wait until Windows is loaded. The JP2 is used to select external clock or internal clock; to select external clock, please short pin 1 and 2, to select internal clock, please short pin 2 and 3.

  EPSON STYLUS SX200 LINUX DRIVER DOWNLOAD

Octal speed board clock rate is Furthermore that the PCCOM product will be supplied free from defects in materials and workmanship and be fully functional under normal usage. Set up communication parameters.

The baud rate speed up to K. Dual speed clock rate is 7.

pccom pci 8 port universal rs232 adapter – Decision

Pinger This development tool make it decisjon for you to make a program that check if your still connected to the network or internet and check the speed of the response of your connection! Do not set up jumpers and switch under power on condition, otherwise it may defective your computer system.

Remote Access Server This development tool use to dial-up like and phone dialer technology, able to dial an ISP and monitor some of some IP address on network Remote Voice Long distance call will not be expensive as before. Welcome call for details. Decision Pccom Pci 8 Port driver installation manager was reported as very satisfying by a large percentage of our reporters, so it is recommended to download and install.

The clock rate is Please set different card number to each adapter do not duplicate card number setting.

Now, your new UNIX system that includes device drivers is activated. Decision Pccom Pci 8 Port Please note that, you device driver may report original baud rate, however the speed of communication line is octal speed.

  FREEBSD ATHEROS WIRELESS DRIVER DOWNLOAD

This series enables you to utilize the built in plug and play functionality of Windowscombined with the power of PCI based serial communication. Please help us maintain a helpfull driver collection.

This option requires basic OS understanding. The switch and the jumpers are properly configured. Provides eight decisioon that contains bytes FIFO for each port.

The signal assignments for a standard DB9 connector are shown below: We list in the following. The operating system you intend to use is capable of driving multiple serial ports. Make sure the adapter is firmly seated in the chosen slot.

Multi Port Serial – (Standard system devices) – Decision PCCOM PCI 2 Port Drivers Download

Set the SW1 to identify card number. After Windows has detected and configured all ports, you may begin using the PCI card. Please note that, you device driver may report original baud rate, however the speed of communication line is dual speed. You can also click the Test button to test your card automatically.

Goods without serial numbers attached will not be covered by the warranty. External loop test — is used to test the ports.